Power Transmission

ESCON CLASSICAL V-BELT

Escon V-belts remain the most widely used and offer reliable service with minimum maintenance in majority of medium and heavy duty industrial applications .
a) Cover : Escon V-Belt Bias cut cover fabric is impregnated with special Choloroprene rubber to provide excellent oil, heat and
abrasion resistance.
b) Tension Member : Super Strength Polyester Cords ensure length stability and trouble free performance .
c) Top Compression Section : High heat dissipating rubber compound can withstands increased flexing and sudden shock loads.
d) Insulation Section: This holds the tension members in place and acts as a binding force between cords, top and bottom Compression Sections.
e) Bottom Compression Set : The bottom compound is specially compounded to resist compression fatigue and heat for longer service life.
Wrapped type belts manufactured by Escon are A, B, C, D and E sections. Escon V-Belts confirm to IS 2494 standards.

ESCON WEDGE BELT

Escon Heavy duty Wedge belts contain high modulus polyester cords , which together with specially formulated bottom compression rubber compound and insulation rubber, constitute over unshakable union even under severest flexing conditions.
Escon Wedge belts do not buckle even on the toughest segments and are most preferred in most compact industrial drives. Escon Wedge belts confirm to IS 14261 and BS 3790
Wedge belts manufactured by ESCON are SPZ, SPA, SPB, SPC, 3V, 5V and 8V

ESCON HEXAGONAL BELT

Escon Hexagonal Belts are used on the drives with one or more reverse bends and usually transmit power on both sides of the belt . Escon Hexagonal Belts possess extra flexibility which allows hassle free bending on both the sides and can with stand to extra stresses encountered in agricultural applications.
These belts are available in standard AA, BB and CC sections. They are commonly used on agricultural machinery.

ESCON BANDED BELT

ESCON Banded V-Belts are two or more V-belts joined together with a high quality Polychloroprene compounding fabric into a single driving belt unit and joined together by a common backing.
These belts are especially useful in heavy-duty applications in which these belts ensure equal load distribution in drives where high shock or vibration problem occur which can cause the belt to flip over or jump out of the Pulley grooves.

ESCON HARVESTOR COMBINE BELT

ESCON HARVESTOR COMBINE V-belts are used in agricultural machinery work in extreme conditions, especially outdoors, where they are exposed to sun, dust, dirt, stones and other objects which can get between the belt and the pulley. In addition, Harvestor belts often work in very operationally challenging transmission systems that are subjected to frequent overloads. During the design of new agricultural machinery, manufacturers take into consideration these conditions and trust Escon Harvester Combine Belts which have been created by a team of engineers with experience in V-Belt Compounding and construction for several decades. These belts are found most suitable design and they adapt to these conditions properly.

ESCON FLAT TRANSMISSION BELT

ESCON FLAT BELTS ARE MANUFACTURED WITH SYMMETRICALLY SET COTTON WOVEN HARD DUCK FABRICS WHICH ARE INFUSED WITH SPECIAL RUBBER COMPOUND. THE TRANSMISSION BELT IS PRE STRETCHED AND POSSES THE REQUIRED ELASTICITY . The Edges of the transmission belt are treated and special quoting is done to prevent ingress of moisture and prevent edge wear.
ESCON DELUXE ( 31 OZ) AND ESCON SUPER DELUXE (34 OZ) transmission belts are made from HARD DUCK SPECIAL COTTON fabrics conforming to BIS 1370: 1993 (Specification) .

ESCON FHP BELT

ESCON Fractional Horse Power (FHP) V-belts are used for light-duty industrial machinery and domestic appliances. ESCON FHP Belt possess excellent flexibility, Smooth and quiet operation in fractional horsepower drive applications.

ESCONRAW EDGE COGGED BELT

These belts due of their design & construction can be used on Smaller Pulley dia than the recommended for conventional V-Belts.  These Belts provide better grip with Pulley surface and transmit maximum percentage of power in comparision to conventional V Belts. As a result they save power while running, the Teeth type construction at the base leads to better heat dissipation  and the belts run cooler. For long service life the construction features wear, oil and heat resistance top and bottom fabric.

They are manufactured in sections AX, BX ,CX, 3VX, 5VX SPZX(XPZ), SPAX(XPA), SPBX(XPB) and SPCX(XPC).

ESCON POLY BELT

Escon Ribbed belts have a fibre-reinforced backing and a large Power Transmitting surface area which gives them high tractability and keeps the belt secure in the pulley. They generate little noise in running and ensure the reliable functioning of all auxiliary devices. Escon Poly belt provide high flexibility and great power performance as they combine the benefits of flat and V Belts.

APPLICATIONS:
Suited for Passenger Cars, Multi utility vehicles (MUV) and Commercial vehicles.

BENEFITS:
Single belt for multiple drives
Highly flexible
Good resistance to heat, wear and tear

ESCON MUD LOADER BELT

ESCON MUD LOADER BELT  ARE SPECIALLY DESIGNED TO GIVES VERY HIGH LIFE DUE TO ITS GREAT TENSILE AND EXCELLENT BONDING.

ESCON PROFILE TOP CONICAL V-BELT

Profile Top V-Belts are available in the classical B and C sections and are mainly used for conveying purposes in the Ceramic Tiles Industry.

ESCON FR AND FRAS V- BELTS

We manufacture V-belts with Fire resistant (FR) and Fire resistant in addition to antistatic (FRAS) properties for working environments such as coal mines and sensitive petro chemical installations. Our belts comply with the requirements of BS 3790 and ISO 1813 standards. Manufactured in all classical and wedge section V-belt as given in the dimension table.

ARAMED CORD REINFORCED V- BELT

Escon Manufactures all classical and wedge section V-Belts with aramid cord reinforcement.
Special Features :
1. Very high tensile strength & Modulus.
2. Very less eloangation.
3. High power rating capacity.
4. Higher flex fatigue resistance.
5. Higher shock load absorption capacity.
6. Higher thermal stability.
Manufactured in all classical and wedge section V-belt as given in the dimension table.